GLOBAL DISTRIBUTORS
Phone: 806-798-9684
Dairy Hoof Trimming Chutes, Equipment, and Training
Menu
806-798-9684

HOOF TRIMMING

CHUTES

RILEY BUILT STATIONARY HOOF TRIMMING CHUTE

The Riley Built Stationary Hoof Trimming Chute is the choice for dairymen and cattlemen. This model was built with security for the cow in mind and features a hydraulic belly belt (or optional hydraulic belly arm) stanchion and layover, which keeps the cow aligned, and makes your job easier. The ease of using this Trimming Chute allows one man to get the job done in the same amount of time as three on a typical standup chute. Hydraulic cow pusher optional.

< >

Front and back door for easy entrance and exit.

All hydraulic control valves are situated by the back door and control the belly bands, belly pan (optional), layover, and head station. These operations can be handled by one man in one spot independently.

Installs in approximately 20 minutes.

Has a sandblasted unit to remove all mill shell that would flake off after painting and is powder coated for long-term durability.

$8,900 USD DELIVERED (as pictured)

Prices subject to change In the contiguous US

RILEY BUILT TRAILER MODEL HOOF TRIMMING CHUTE

The Riley Built Trailer Model Chute can be pulled by any half ton or larger pickup for easy transport. Your equipment will always be close at hand with a dedicated compartment to house your tools, medication, blocks, and wraps.

< >

Front door is hydraulically opened and closed for ease of operation and to make a smooth exit for the animal.

All hydraulic control valves are situated by the back door and control six different aspects of the chute, including: station, front door, belly bands (belly pan optional), chute layover, cow-pusher, and outriggers. These operations can be handled by one man in one spot independently, without help from anyone.

Hydraulic Station for ease of operation.

Tandem Axle Trailers come with brakes and lights that hook up and detach in less time.

Use an interspring axle encased in rubber built specially for us, for a much more comfortable ride and better suspension.

This model can be pulled by any half ton or larger pickup for easy transport. Total weight 3,900 pounds and DOT compliant.

$31,900 USD DELIVERY NOT INCLUDED

in the contiguous U.S. | Plus additional for delivery or pickup

1-TON 4x4 SINGLE REAR WHEEL (FOR TIGHT QUARTERS) RILEY BUILT HOOF TRIMMING CHUTE

The 1-Ton Riley Built Hoof Trimming Chute is perfect for owners and operators who want speed and efficiency put back into the hoof trimming process. This model is completely hydraulic - including the cow pusher. It’s an all-in-one model that gives you the convenience of bringing the chute where you need to be, not to mention it’s fully stocked so there’s no need to purchase additional tools or supplies. Our 1-Ton Hoof Trimming Chute is sold factory direct to the consumer, which means savings for you. The protective fencing will protect your new investment, as well as your cows.

< >

Front door can be hydraulically opened and closed for ease of operation, and to make a smooth exit for the animal.

All hydraulic control valves are situated by the back door and control six different aspects of the chute, including: station, front door, belly bands (belly pan optional), chute layover, cow-pusher, and outriggers. These operations can be handled by one man in one spot independently, without help from anyone.

Hydraulic Station for ease of operation

An optional add-on is staging lanes which can be built by us for your desired specifications.

$69,500, DELIVERY AVAILABLE.

Price vary depending on equipment groups in the truck itself (ex: XL or XLT)

What comes with your new chute?

7 amp 12,000 rpm dewalt grinder (slim model)

3 or 6 blade Riley Built Trimming Disc

1 box of grade 8 carbide inserts

1 box of hoof wraps

1 hooftight glue gun

1 tube of hooftight glue

5 rubber blocks

5 wooden blocks

10 hooftight mixing tips

1 pair of leather gloves

1 jar of drawing salve (ichthammol)

1 jar of nitro zone

1 springer magrath cattle prod

1 bottle of iodine

T handle for blade removal and install

1 frost hoof knife

1 pail of hairy wart treatment

PRODUCT TESTIMONIALS

"Hoof care is important to cattle, whether beef or dairy, cow or bull. Lame cattle don't thrive. Since purchasing my Riley Built chute I have gone from abhorring foot work to enjoying it. The ability to offer better and safer service to the cattle of my clientele is important and satisfying to me as a practitioner. I told Bill that the only regret that I have on the chute is that I didn't purchase a Riley Built chute 15 or 20 years ago."

PAT COMYN

DVM

"Thank you for allowing me the opportunity to visit Texas and spend some time hoof trimming with you. It was a great experience. The knowledge I gained has helped me in consulting clients on preventative hoof care in my veterinary practice.

I was very impressed with your chute design especially the safety and ease of handling for both the operator and animal. Cow after cow was quickly restrained for trimming without injury or stress and remained calm through the entire procedure. I am fully convinced that a tilt system such as yours is safer and more humane than an upright chute using only belly bands for support. The view of the hooves your table provides is excellent for accurate diagnosis and treatment of any claw or foot problem. Congratulations on a winning design, and keep up the good work."

ALAN LANGILL

DVM

"After 3 years, I wanted to say thanks for the support, help and great chutes. After trimming on junk that was sure to kill me or the cow, a Riley Built chute was a welcome sight in my driveway. Now 3 chutes later and growing to over 20,0000 cows a year, thank you for making it all possible by building the best cattle handling equipment on earth."

BRANDON BEAVERS

Beavers Hoof Care, LLC

"Just wanted let you know that I am 100% satisfied with the new truck and chute. I really like the cow pusher and air bladder. There was never any doubt when it was time to replace my old truck and chute about buying another Riley Built. In my opinion 30 seconds spent looking at others is 29 seconds too long. Thank you for building a chute that has helped me to produce a very good income for the past 13 years."

DARRELL STYCZYNSKI

Manitowoc, Wisconsin

"I just finished the first day with a 2011 Riley Built chute. This is my third truck and chute from Bill. The last truck I kept for ten years and still had ten more years in it. I just wanted to upgrade to some of the new things he had added. The cow pusher is the best upgrade I have seen. I trimmed about sixty cows today and I was sold on it after about ten cows. I don’t take to change very well but this thing is smooth and makes trimming a lot easier, safer and more enjoyable. I didn’t realize that I needed this thing until I actually had one. I can’t say enough how much I enjoyed trimming on this truck today. I have been trimming for 20 years and it is hard to impress me but this chute did it today. Thanks Bill for all your help and support."

JASON HARKEY

North Carolina

"I’d like to thank Bill at Riley Built for making the best hoof trimming chute, in my opinion, in the world. Whether I’m trimming a large beast or the smallest of heifers it’s never an issue with my Riley Chute. I’ve been using my trailer chute for three years and it just keeps getting better and better every day as it does my trimming. The chute is faultless and trouble free, I have not missed a single day’s trimming since purchasing my Riley Chute. I was previously trimming in an upright chute and doing between 25-40 head maximum all four feet per day but now with my Riley Chute I’m comfortably doing 50-135 head all four feet per day."

DARREN DAVIES

West Wales UK

"I just finished the first day trimming on my new 2011 Riley Built table. I wanted to let you know how well it worked. I love it. This is the fourth Riley Built table I’ve owned in 11 years, and by far is the nicest and best. The new features are awesome. The cow pusher feature is absolutely the best improvement yet. It worked very well and made the day so easy I felt like I was “cheating”. Thanks again for another very well built quality product."

Keith Snow

ARE YOU READY TO PERFECT YOUR HOOF TRIMMING ROUTINE? - CONTACT US TODAY >
Close

Mexico & Finland

Mexico Finland
Close

Hoof Trimming Chutes - Mexico

Riley Built is dedicated to providing quality hoof trimming equipment to it's customers. Never before has there been a dairy hoof trimming system like ours. The versatility of our reclining hydraulic bed is designed to offer the utmost in simplicity, speed, and security.

If you are located in the Mexico / Latin America area and have questions, please contact the representative below:

Campestre Los Nogales

Torreon, Coah., Mexico.

Tel/Fax: (871) 180.0793

Close

Hoof Trimming Chutes - Finland

Riley Built is dedicated to providing quality hoof trimming equipment to it's customers. Never before has there been a dairy hoof trimming system like ours. The versatility of our reclining hydraulic bed is designed to offer the utmost in simplicity, speed, and security.

If you are located in the Finland / European area and have questions, please contact the representative below:

Goosehill Beef Service GBS

Lähteentie 8, 62300 HÄRMÄ FINLAND

Telephone GSM: +358 40 539 0746

VAT #: FI18411836

Close

Hoof Trimming Chutes - Australia/New Zealand

Riley Built is dedicated to providing quality hoof trimming equipment to it's customers. Never before has there been a dairy hoof trimming system like ours. The versatility of our reclining hydraulic bed is designed to offer the utmost in simplicity, speed, and security.

If you are located in the Australia/New Zealand area and have questions, please contact the representative below:

Adrian Carr
Country Vet Wholesaling Pty Ltd

linkedin

27-33 Piper Lane, East Bendigo VIC 3550

Ph: +613 5445 5930 | Fax: +613 5445 5914 | Mobile: 0488 011 810

adrian@countryvet.com.au